Replacement Of Power Supply; Replacement Of Customer I/O Power Supply - ABB IRC5 Product Manual

4.22 Replacement of power supply

4.22.1 Replacement of customer I/O power supply

Location
The customer I/O power supply is shown in the following illustration.
xx0600003258
Required equipment
Equipment
Customer I/O power supply
Standard toolkit
Other tools and procedures
may be required. See refer-
ences to these procedures in
the step-by-step instructions
below.
Circuit diagram
Removal
The procedure below details how to remove the customer I/O power supply.
1
2
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: AB
Action
DANGER
Before doing any work inside the cabinet, discon-
nect the mains power. For more information, see
Electrical safety on page
Loosen the terminal screws for each connected
wire. Remove wires from the terminals.
© Copyright 2007-2024 ABB. All rights reserved.
4.22.1 Replacement of customer I/O power supply
Article number
3HAC14178-1
See Circuit diagrams on
page 273.
35.
4 Repair
Note
DSQC 609
The contents are defined in
section Standard toolkit.
These procedures include
references to the tools re-
quired.
Note/Illustration
Continues on next page
229