Replacement Of Sd-Card Memory In Computer Unit - ABB IRC5 Product Manual

4.10 Replacement of SD-card memory in computer unit

Location
The location and orientation of the SD-card memory is shown by the following
illustration.
xx1300000807
A
B
Required equipment
Equipment
SD-card 2GB
Standard toolkit
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: J
Note
Only use SD-card memory supplied by ABB.
CAUTION
Reformatting the SD-card or modifying the disk partition can cause irreparable
boot-up problems.
© Copyright 2007-2018 ABB. All rights reserved.
4.10 Replacement of SD-card memory in computer unit
Slot for SD-card memory
SD-card memory
Note
See
Only use SD-card memory supplied by
ABB.
Includes ABB Boot Application software
to correctly reboot the robot controller.
The content is described in section
Standard toolkit, IRC5 on page
4 Repair
A
Spare parts on page 231.
Note
Continues on next page
B
229.
173