ABB IRC5 Product Manual page 63

Connecting incoming power to the Drive Module
Use this procedure to connect power supply to the drive module.
1
2
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: J
Action
Place the line filter and transformer
near to the drive module and they
must be on the same ground.
Connect the incoming power to the
Line filter (LINE).
© Copyright 2007-2018 ABB. All rights reserved.
2 Installation and commissioning
2.5.3 Connecting power supply to PMC large
Note/illustration
xx0600003315
Continues on next page
Continued
63