Equipment
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
References
Equipment
Application manual - PROFIBUS
Controller
Application manual - DeviceNet
Master/Slave
Circuit diagram
Removal
The procedure below details how to remove a PCIexpress board.
1
2
3
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: J
4.6 Replacement of PCIexpress boards in the computer unit
Action
DANGER
Before commencing any work inside the
cabinet, please observe the safety inform-
ation in section
Make sure that the main
power has been switched off on page
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before hand-
ling the unit please observe the safety in-
formation in section
The unit is sensitive
to ESD on page 32
Disconnect any cables to/from the PCIex-
press board.
© Copyright 2007-2018 ABB. All rights reserved.
Art. no.
Note
These procedures include refer-
ences to tools required.
Art. no.
Note
3HAC050966-001
Contains information on how to
configure the system for PROFIBUS
devices.
3HAC050992-001
Contains information on how to
configure the system for DeviceNet
devices.
See
Circuit dia-
grams on page
249.
Note/Illustration
25.
Tip
Make a note of which cables are disconnec-
ted.
4 Repair
Continued
Continues on next page
159