2 Installation and commissioning
2.7.1 Memory functions
2.7 Memory functions
2.7.1 Memory functions
General
The controller is fitted with an SD-card memory containing ABB Boot Application
software. The SD-card memory is located inside the computer unit.
For more information on how to replace the SD-card memory, see
of SD-card memory in computer unit on page
96
Note
Only use SD-card memory supplied by ABB.
CAUTION
Reformatting the SD-card or modifying the disk partition can cause irreparable
boot-up problems.
© Copyright 2007-2018 ABB. All rights reserved.
173.
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: J
Replacement