Replacement Of Brake Resistor Bleeder For Pmc Large - ABB IRC5 Product Manual

4 Repair

4.20 Replacement of brake resistor bleeder for PMC large

4.20 Replacement of brake resistor bleeder for PMC large
Location
The illustration below shows the location of the brake resistor bleeder in the PMC
large. The brake resistor bleeder is located in the air channel behind the drive
module.
xx1100000523
A
Required equipment
Equipment
Brake resistor bleeder
Standard toolkit
Other tools and procedures may be required.
See references to these procedures in the
step-by-step instructions below.
Circuit diagram
Continues on next page
206
Brake resistor bleeder
© Copyright 2007-2018 ABB. All rights reserved.
A
Note
See Drive module parts for PMC large on
page 233.
The contents are defined in section Stand-
ard toolkit
These procedures include references to the
tools required.
See Circuit diagrams on page
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: J
249.