ECC800 Data Center Controller
User Manual
5.7.6 Commissioning a Door Status Sensor
5.7.6.1 Commissioning a Door Status Sensor (Connected to the AI/DI port
on the independent deployment AI/DI unit)
If a door status sensor is installed, perform the following steps to configure it.
Context
If the sensor is prefabricated, only check its settings.
Procedure
Step 1 Set parameters for a door status sensor.
1.
2.
3.
4.
5.
6.
Step 2 Check the door status sensor functions.
Table 5-38 Commissioning the sensor
Check Method
Open the cabinet door.
----End
5.7.6.2 Commissioning a Door Status Sensor (Connected to the AI/DI port
on the rack environment unit)
If a door status sensor is installed, perform the following steps to configure it.
Context
If the sensor is prefabricated, only check its settings.
Issue 02 (2019-02-28)
In this example, the door status sensor is connected to the AI/DI_1 port on the independent deployment
AI/DI unit.
Log in to the ECC800 WebUI as an administrator.
Choose Monitoring > System > Independent Deployment AI_DI Group >
Independent Deployment AI_DI 1 > Running Parameters > AI/DI_1 Port Settings.
Set AI/DI_1 sensor to Enable, and click Submit.
Set AI/DI_1 sensor name to Door sensor 1.
Order number of door sensor name is same as cabinet.
check that AI/DI_1 sensor type is set to Door sensor, and click Submit.
Perform the preceding operations to set parameters for ports AI/DI_2 to AI/DI_8.
Copyright © Huawei Technologies Co., Ltd.
Normal Connection Status
Door sensor 1 AI/DI_1 DI alarm is generated on the
active alarm page of the app or WebUI.
5 Power-On Commissioning
136