Huawei ECC800 User Manual page 165

ECC800 Data Center Controller
User Manual
4.
Step 2 Enabling camera NTP synchronization.
The camera NTP synchronization function for the server is disabled by default. The camera
NTP synchronization function needs to be enabled for the server that connects to cameras.
After the camera NTP synchronization function is enabled, cameras will automatically
time-synchronize from their access servers.
1.
2.
3.
Issue 02 (2019-02-28)
Figure 5-29 Configuring the server
 Set Business IP to 192.168.11.110, Subnet mask to 255.255.255.0, Gateway IP to 192.168.11.1.
The values here are examples. The actual values prevail.
 Set NAT IP to VCN500 external IP address, which is the same as the external IP address mapped
from the VCN500 internal IP address displayed on the ECC800.
Configure the NTP synchronization. After setting The NTP clock source server to Yes,
set the IP address of the NTP server.
The server that connects to cameras needs to enable the camera NTP synchronization function. For the
detailed operations, see Step
Log in to the OMU portal of the VCN as the Admin user.
Choose Maintenance > Unified Configuration.
Select the server that the camera needs to access, set Module name to SCU and
Parameter type to System property, and click Search.
Figure 5-30 Configuring Camera NTP Synchronization
Copyright © Huawei Technologies Co., Ltd.
2.
5 Power-On Commissioning
156