How Should I Open Doors Remotely Over The Ecc800 Webui - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Table 9-5 Parameter description for adding a device
Path
Monitoring >
System >
ECC800 >
Running
Parameters >
AI/DI_1 Port
Settings
NOTE
Step 3 After setting all mandatory parameters, click Submit.
----End
Follow-up Procedure
Choose Home > Plan View on the ECC800 WebUI, and drag the device to the corresponding
position in the Smart Module View pane based on the actual device layout.
9.1.24 How Should I Open Doors Remotely over the ECC800
WebUI
Context
If O&M personnel need to enter a smart module but do not take an access cord or forget the
password, you can open the door remotely over the ECC800 WebUI.
Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Open the aisle door.
Table 9-6 Operations for opening a door remotely
Path
Monitoring > Aisle > Access
Actuator Group > Access
Actuator n > Controls
Issue 02 (2019-02-28)
Parameter
AI/DI_1 sensor
AI/DI_1 sensor
name
AI/DI_1 sensor
type
The setting example
indicates that the
device connects to
AI/DI_1 power
the AI/DI_1 port on
supply
the ECC800. If the
device connects to
another port, enter
the number of the
connected port.
Copyright © Huawei Technologies Co., Ltd.
Setting
Select Enable and click Submit
Enter the device name.
Select the type of the device to be accessed from
the drop-down list box.
NOTE
For certain devices, the device type can be
automatically identified after the device is connected.
The default value is Enable.
Setting
Select Remote door opening and click Submit
9 FAQ
214