Huawei ECC800 User Manual page 41

ECC800 Data Center Controller
User Manual
Item
Wiegand
interface
BLINK button
Address DIP
switch
E-label
Indicators
Table 3-27 Access actuator indicator description
Indicator
PWR
Issue 02 (2019-02-28)
Specifications
Two Wiegand interfaces, 12 V DC card reader operating power output;
two routes of card readers can operate at the same time.
 Press the button for less than 1 second to start blinking.
 Hold down the button for 1–5 seconds to search for a network and
start networking.
 Hold down the button for more than 6 seconds to clear network
parameters.
4-pin address DIP switch
Supported
Color
Green
Copyright © Huawei Technologies Co., Ltd.
Name
Power input status
indicator
3 Device Description
Status

Steady on: The power
input is normal.

Off: There is no
power input.
32