Huawei ECC800 User Manual page 67

ECC800 Data Center Controller
User Manual
Figure 3-30 ETH converter
(1) Status indicator
(4) COM2 communications port
Specifications
Table 3-52 ETH converter technical specifications
Item
Power input
RS485 or
control area
network
(CAN)
BLINK
button
E-label
Indicators
Table 3-53 ETH converter indicators
Indicator
Issue 02 (2019-02-28)
(2) BLINK button
(5) 48 V power port
Specifications
 DC input: Terminal, with input voltage of 36–60 V DC
 PoE power supply: One PoE port, 10/100M communication rate,
complying with IEEE802.3at
Provides two RS485/CAN ports. The default communications rate for the
RS485 port is 9600 bit/s, and that for the CAN port is 125 kbit/s. Both
ports match the RJ45 terminal shared by RS485 and CAN.
If you press the BLINK button, the RUN indicator blinks intermittently at
super short intervals (blinking at super short intervals for 0.5s and then off
for 0.5s) for 10 seconds.
Supported
Color Name
Copyright © Huawei Technologies Co., Ltd.
(3) COM1 communications port
(6) PoE port
Status Description
3 Device Description
58