How To Associate An Alarm With A Do Output - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Figure 9-2 Monitoring
Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose Maintenance > Parameter Sync.
Step 3 Select a value from the Device type drop-down list box.
Step 4 Specify source device and target device, click Submit.
When synchronizing the device parameters, ensure that the target device is communicating
properly with the ECC800; otherwise, the synchronization will fail.
----End

9.1.14 How to Associate an Alarm with a DO Output?

Context


Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose System Settings > Alarm Parameter Settings > Alarm Linkage.
Step 3 Set Select a device type to ECC800 and click Confirm.
Step 4 Select the alarm to be bound to a DO port, and click Select in the Output Dry Contact
column.
Step 5 Choose Device type or Device from Linkage Type.
Issue 02 (2019-02-28)
After an alarm and a DO output are associated, the device connected to the DO port will
act if the alarm is generated.
This section describes how to associate an ECC800 alarm with a DO output.
Copyright © Huawei Technologies Co., Ltd.
9 FAQ
205