Response To Part Program Interruption - Siemens SINUMERIK 840D sl Function Manual

16.2.7

Response to part program interruption

Following an interruption in the part program (NC-STOP) and subsequent change to JOG
mode, the technological function is deactivated or switching signals cease to be output.
The technology function is reactivated or switching signals are output again only after
switching to the AUTOMATIC mode and continuing the part program (NC-START).
Special Functions
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
TE8: Cycle-independent path-synchronous switching signal output
16.2 Functional description
655