Basics; Coupling Module - Siemens SINUMERIK 840D sl Function Manual

M3: Coupled axes
5.5 Generic coupling
5.5.2

Basics

5.5.2.1

Coupling module

With the aid of a coupling module, the motion of one axis, ( → following axis), can be
interpolated depending on other ( → leading) axes.
Coupling rule
The relationships between leading axis/values and a following axis are defined by a coupling
rule (coupling factor or curve table). The individual motion components from the individual
leading axes/values have an additive effect.
The relationship is demonstrated by the following example (following axis with two leading
axes):
FA
Total
FA
Cmd
FA
DEP1
FA
DEP2
LA
1
LA
2
SynPosLA
SynPosLA
KF
1
KF
2
272
Total setpoint value of the following axis
Setpoint value set in part program
= independent motion component of the following axis
Dependent motion component of leading axis 1
Dependent motion component of leading axis 2
Setpoint or actual value of the 1st leading axis
Setpoint or actual value of the 2nd leading axis
Synchronized position of the 1st leading axis
1
Synchronized position of the 2nd leading axis
2
Coupling factor of the 1st leading axis
Coupling factor of the 2nd leading axis
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Special Functions