Tangential Control (T3); Special Response To Signals - Siemens SINUMERIK 840D sl Function Manual

21.6

Tangential Control (T3)

21.6.1

Special response to signals

The movement of the axis under tangential follow-up control to compensate for a tangent
jump at a corner of the path (defined by the movements of the leading axis) can be stopped
by the following signals (e.g. for test purposes):
• NC Stop and override = 0
• Removal of the axis-specific feed enable
The signals are described in:
References:
/LIS2/ Listen (Book 2)
Special Functions
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Z3: NC/PLC interface signals
21.6 Tangential Control (T3)
741