Programming
Syntax:
Identifiers:
Functionality:
Following axis/
spindle:
Example:
Programming
CPDEF=(X2)
Constraints
•
The maximum number of coupling modules is limited (refer to " Preconditions [Page
268] ").
•
The application of CPDEF to an already created coupling module is possible and will not
result in an alarm being generated.
5.5.3.2
Delete coupling module (CPDEL)
A coupling module created with CPDEF can be deleted with CPDEL.
Programming
Syntax:
Identifiers:
Functionality:
Following axis/
spindle:
Special Functions
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
CPDEF= (<following axis/spindle>)
Coupling Definition
Definition of a coupling module The coupling is not activated.
Type:
AXIS
Range of values:
All defined axis and spindle identifiers in the channel
Comment
; A coupling module is created with axis X2 as following
axis.
CPDEL= (<following axis/spindle>)
Coupling Delete
Deletion of a coupling module. All leading axis modules are deleted
with the coupling module and reserved memory is released.
Type:
AXIS
M3: Coupled axes
5.5 Generic coupling
277