Corners For Circumferential Milling - Siemens SINUMERIK 840D sl Function Manual

Figure 19-4
19.2.1

Corners for circumferential milling

Outside corners/inside corners
Outside corners and inside corners must be treated separately. The terms inside corner and
outside corner are dependent on the tool orientation. When the orientation changes at a
corner, for example, the corner type may change while machining is in progress. Whenever
this occurs, the machining operation is aborted with an error message.
Figure 19-5
Special Functions
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Insertion depth
Corner type
W5: 3D tool radius compensation
19.2 Circumferential milling
699