Constraints - Siemens SINUMERIK 840D sl Function Manual

S9: Setpoint switchover

7.7 Constraints

7.7 Constraints
"Parking" operating status
The "parking" operating state can only be exited using the axis with the drive checking
function.
Service display drive
The "Drive Service Display" HMI diagnostics screen does not take into account changes in
assignments between the machine axes and the drive.
SinuComNc
When using SinuComNc, it is only possible to commission the setpoint changeover via the
expert list.
Safety Integrated (only 840D sl)
A detailed description of the supplementary conditions for setpoint changeover in conjunction
with Safety Integrated is available in:
References:
Manual SINUMERIK Safety Integrated
414
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Special Functions