K6: Contour tunnel monitoring
4.5 Examples
4.5
Examples
4.5.1
Programmable contour accuracy
Program code
N10 X0 Y0 G0
N20 CPRECON
N30 F10000 G1 G64 X100
N40 G3 Y20 J10
N50 G1 X0
N100 CPRECOF
N110 G0 ...
200
Comment
; Enabling the contour accuracy defined by MD.
; Machining with10 m/min in the continuous-path mode.
; Automatic limitation of the feedrate in the circle
block.
; Feedrate again 10m/min.
; Disabling the programmed contour accuracy.
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Special Functions