Siemens SINUMERIK 840D sl Function Manual page 732

Z3: NC/PLC interface signals
21.1 3-Axis to 5-Axis Transformation (F2)
DB21, ...
DBX318.2
Edge evaluation: Yes
Signal state 1 or edge
change 0 → 1
Signal state 0 or edge
change 1 → 0
Signal irrelevant for ...
Additional references
DB21, ...
DBX318.3
Edge evaluation: Yes
Signal state 1 or edge
change 0 → 1
Signal state 0 or edge
change 1 → 0
Signal irrelevant for ...
Additional references
732
TOFF active
Signal(s) updated:
Activate online tool length offset.
Reset online tool length offset.
The "generic 5-axis transformation" option is not available and no handling transformations
are active.
/FB3/ Function Manual, Special Functions, 3-Axis to 5-Axis Transformation (F2)
TOFF motion active
Signal(s) updated:
Activate offset motion.
Deactivate offset motion.
The "generic 5-axis transformation" option is not available and no handling transformations
are active.
/FB3/ Function Manual, Special Functions, 3-Axis to 5-Axis Transformation (F2)
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Special Functions