Z3: NC/PLC interface signals
21.5 Setpoint Exchange (S9)
21.5
Setpoint Exchange (S9)
21.5.1
Signals to axis/spindle (DB31, ...)
DB31, ...
DBX24.5
Edge evaluation: No
Signal state = 1
Signal state = 0
21.5.2
Signals from axis/spindle (DB31, ...)
DB31, ...
DBX96.5
Edge evaluation: No
Signal state 1
Signal state 0
Signal relevant for ...
740
Activate setpoint exchange
Signal(s) updated: Cyclic
Request to axis to take over drive control.
Request to axis to relinquish drive control.
Status of setpoint exchange
Signal(s) updated: Cyclic
The axis has taken over control of the drive.
The axis has relinquished control of the drive.
All axes involved in setpoint exchange.
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Special Functions