Te8: Cycle-Independent Path-Synchronous Switching Signal Output; Brief Description - Siemens SINUMERIK 840D sl Function Manual

TE8: Cycle-independent path-synchronous switching
signal output
16.1

Brief description

Function
The "Cycle-independent path synchronized switching signal output" technological function
serves the purpose of switching time-critical, position-based machining processes on and off
quickly, e.g. high speed laser cutting (HSLC; High Speed Laser Cutting).
The switching signal output can be block-related or path length-related:
• Block-related switching signal output
The switching signal output and therefore, the activation / deactivation of the machining is
undertaken independently of the status changes:
-
-
• Path length-related switching signal output
The switching signal output and therefore, the activation / deactivation of the machining
takes place in a continuous change and is monitored along the traversed path.
This enables a regular machining without the individual switching positions having to be
programmed explicitly.
The activation or selection of the mentioned options leads to the monitoring of the output of
the digital signal which is programmed with a part program command.
I/Os
Only the on-board I/Os of the relevant NC module can be used as the digital I/O via which the
switching signal is output:
SINUMERIK
840D
840Di
Restrictions
The use of the "Cycle-independent path synchronized switching signal output" technological
function is subject to the following restriction:
• The technological function is available only in one channel of NC.
Special Functions
Function Manual 09/2011, 6FC5397-2BP40-2BA0
Rapid travel mode G00 active / inactive
Programmed feed threshold fell short / exceeded
Output of the switching signal
The switching signal can only be output via one of the 4 on-board digital outputs on
the NCU module.
The switching signal can only be output via one of the 4 on-board digital outputs on
the MCI board extension module (option).
16
647