Siemens SINUMERIK 840D sl Function Manual page 437

Execution
Perform the following operation to load a compile cycle from an external computer into the
NCK:
1. Start the "WinSCP3" program on the external computer (programming device / PC)
2. Establish a connection to the PCU by selecting an appropriate profile or by entering the
host name or IP address, the user name and the password.
3. Copy the compile cycle from the external computer into the following directory on the PCU:
/card/oem/sinumerik/data/cc
The file name of the compile cycle should have any capital letters in the directory of the
PCU.
4. Initiate an NCK reset.
Special Functions
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
TE01: Installation and activation of loadable compile cycles
9.1 Loading compile cycles
437