Compensation Vector - Siemens SINUMERIK 840D sl Function Manual

Figure 11-5 Control structure, clearance control (principle)
11.2.4

Compensation vector

Standard compensation vector
The compensation vector of the clearance control and the tool orientation vector are normally
identical. Consequently, the compensation movement of the clearance control is normally
always in the direction of the tool orientation.
Figure 11-6
Special Functions
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Clearance control with standard compensation vector
TE1: Clearance control
11.2 Clearance control
463