Behavior Of The Following Axis At Switch-Off (Cpfmof) - Siemens SINUMERIK 840D sl Function Manual

5.5.5.9

Behavior of the following axis at switch-off (CPFMOF)

The behavior of the following axis/spindle during complete switch-off of an active coupling can
be programmed with the keyword CPFMOF.
Programming
Syntax:
Identifiers:
Functionality:
Switch-off response:
Example:
Programming
CPFMOF[S2]="CONT"
Special Functions
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
CPFMOF[FAx]= "<switch-off behavior>"
Coupling Following Mode Off
Defines the behavior of the following axis/spindle during complete
switch-off of the coupling.
Type: STRING
Range of values:
"STOP" Stop
"CONT" Continue
Default value: "STOP"
Comment
; The following spindle S2 continues to traverse at the speed
that was applied at the instant of deactivation.
M3: Coupled axes
5.5 Generic coupling
Stop of a following axis/spindle.
An active overlaid motion is also
braked to standstill. Then the
coupling is opened, (deactivated).
For spindles and main traverse axes
only!
The following spindle continues to
traverse at the speed/velocity that
applied at the instant of deactivation.
297