Table 7-15 Auto Slow Shutter Limits - Honeywell ACUIX User Manual

Document 800-01023 Rev A
02/08
5. Select 5 to set the Auto Slow Shutter Limit. Selecting 5 toggles between the
available settings.
6. Select 6 to toggle the Wide Dynamic Range ON or OFF. The default setting is OFF.
The Wide Dynamic Range is only functional if the camera is in auto iris mode. The
Wide Dynamic Range scans the video and sets the exposure level so it is balanced
between the bright areas and dark areas in the video.
7. Select 7 to toggle Interlace Scanning
ON and OFF. If you set to ON, the
Wide Dynamic Range and Motion
Detection features of the camera are
disabled. Select Y (yes) to set to On or
N (no) to leave it set to Off.
8. When you are finished setting up the
video, send an ESC command to the
ACUIX. The display returns to the
Camera Options menu.
White Balance
Select 4 from the Camera Options menu to
set the camera White Balance.
1. Select 1 to toggle the White Balance
ON or OFF. If the Manual White
Balance is set to ON, the Red Gain
and Blue Gain settings can be
changed.
2. If you set the Manual White Balance to
ON, select 2 to change the Red Gain
setting. The default setting is 128.
Enter a number between 0–511, then
press Enter.
3. If you set the Manual White Balance to ON, select 3 to change the Blue Gain setting.
The default setting is 128. Enter a number between 0–511, then press Enter.
ACUIX High Speed Dome User Manual
Table 7-15 Auto Slow Shutter Limits
NTSC
1/60
1/30
1/15
1/8
1/4 default
1/2
This will Disable
WDR & Motion Detection.
Are you sure that you
want to do this?
-Y/N-
ESC to Exit
1 Manual White Balance .. OFF
2 Red Gain 0-511 ........ 128
3 Blue Gain 0-511 ....... 128
ESC to Exit
White Balance
113