Recording Settings; Adding A Recording Setting; Figure 87 Play Search Result; Figure 88 Recording Settings - Honeywell 30 Series Manual

Figure 87 Play Search Result

•
Download: Click on a search result and click DOWNLOAD, and a file download
window will pop up for you to save the file. You can play the video clip by VLC player.
•
JPEGs to AVI: This function only applies to "JPEG" format files such as snapshots.
You can select several snapshots from the list and then click JPEGS TO AVI. Those
snapshots will be converted into an AVI file.
•
Lock/Unlock: Select the checkbox in front of a desired search result, then click
LOCK/UNLOCK. The selected items will become Locked, which will not be deleted
during cyclic recording. You can click again to unlock the selections.
•
Remove: Select the desired search results, then click REMOVE to delete the files.

Recording Settings

Go to Setup  Storage Setup  Recording Settings.
This section describes how to configure the recording settings for the camera.

Figure 88 Recording Settings

SD Test: Insert the SD card and click here to test.
Format your SD card via the camera's web console when using it for the first time.
Note:
For more information, see

Adding a Recording Setting

Click Add to open the recording setting window. On this page, you can define the
adaptive recording, recording source, recording schedule, and recording capacity. A
total of 2 recording settings can be configured.
Honeywell 30 Series IP Cameras User Guide
on page
SD Card Status
.
70
73