Auto Focus; Vectorscan Auto Focus - Honeywell HD6 Series User Manual

5.3 CONTROL OPTIONS, CONTINUED
To enter a P, V, or T in the FUN field or a Yes (Y) or No (N) in the ENA field when
using an HJZTP Controller,
a. Position the cursor on the FUN or ENA field. Use the F1 ( ) F2 ( ), F3 ( ) or
b. Press the camera and preset keys to scroll through the available characters.

5.3.6 Auto Focus

Select 6 to setup the operation of the Lens
Auto Focus. Selecting 6 toggles between
the options (OFF, Z, PTZ).
The minimum focus distance is set at 1.0
meter (3.3 feet) from the camera lens in both
manual and automatic focus mode.
Note: If the 23x color or 25x True Day/Night
camera is installed, the OFF option is
disabled.
Value
OFF
Z
PTZ

5.3.7 VectorScan Auto Focus

Select 7 to toggle the VectorScan Auto
Focus feature ON or OFF.
Rev. 1.02
F4 ( ) keys to move the cursor between fields.
When the desired character is flashing on the controller LCD, press the aux key.
Turns the Auto Focus feature OFF. The lens must be manually
focused.
The lens auto focuses whenever the zoom setting is changed.
The lens auto focuses whenever the pan, tilt, or zoom positions
are changed.
1 PASS................................................ ON
2 Auto-Pivot ........................................ ON
3 Program Alarms
4 Set Pan and Tilt Options
5 Set Default Function
6 Auto Focus ......................................... Z
7 VectorScan Auto Focus ................ OFF
ESC to Exit
Usage
1 PASS................................................ ON
2 Auto-Pivot ........................................ ON
3 Program Alarms
4 Set Pan and Tilt Options
5 Set Default Function
6 Auto Focus ......................................... Z
7 VectorScan Auto Focus ................ OFF
ESC to Exit
36
CONTROL OPTIONS
CONTROL OPTIONS
900.0679
22-June-2006