Configuring Camera Settings; Configuring General Settings; Configuring Video Settings; Mode - Honeywell 35 Series User Manual

CHAPTER
4
CONFIGURING CAMERA
SETTINGS

Configuring General Settings

Go to Setup > Camera Setup > General Settings.
On this page, you can configure the general video settings.
To change the video standard, select PAL or NTSC. Click SAVE.

Figure 15 General Settings

Configuring Video Settings

Go to Setup > Camera Setup > Video.
This section describes how to configure Video stream and ROI settings.

Mode

Go to Setup > Camera Setup > Video > MODE.
The Mode function is applicable for HC35WZ2R25.
Note: •
Changing the video mode will clear the following settings: privacy mask,
•
image setting, motion, preset position and focus window.
Honeywell 35 Series IP Cameras User Guide
17