Enabling Wireless (Spa525G Only) - Cisco SPA942 - - IP Phone Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Configuring Phone Features
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
Cisco SPA and Wireless IP Phone Administration Guide
Parameter
Bluetooth Volume
Click Submit All Changes.
Configuring Audio Input Gain (SPA9X2/SPA525G only)
You can amplify or deamplify the sound on your phone's handset, headset, and
speakerphone.
Log in to the web administration interface.
Click Admin Login and advanced.
Click the Phone tab.
Under Audio Input Gain (dB), choose the item to configure.
• If you enter a positive value, amplification increases (sound is louder).
• If you enter a negative value, amplification decreases (sound is softer).
• You can enter a value from -6 decibels to +6 decibels. All fields default to
zero.
• Try a value that is loud enough without producing echo (an issue if the input
gain is too high).
Click Submit All Changes.

Enabling Wireless (SPA525G only)

The SPA525G supports Wireless-G. To enable wireless:
Log in to the web administration interface.
Click Admin Login and advanced.
Click the System tab.
Description
Sets the volume for the Bluetooth device.
NOTE Applies to SPA525G only.
4
73