Assign A Ringtone To An Extension; Configure The Audio Settings - Cisco 6800 Series Administration Manual

Phone Administration
Step 3
Click Submit All Changes.

Assign a Ringtone to an Extension

Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > Ext(n), where (n) is the number of an extension.
Step 2 Under Call Feature Settings, use the Default Ring (n) drop-down list box to specify one of the following:
• No Ring
• Choose one of the available 12 ringtones.
Step 3
Click Submit All Changes.

Configure the Audio Settings

The user can modify volume settings by pressing the volume control button on the phone, then pressing the
Save softkey.
Before you begin
Access the phone administration web page. See
Procedure
Step 1 Select Voice > User.
Step 2
In the Audio Volume section, configure a volume level of 1 (quiet) through 10 (loudest):
• Ringer Volume—Sets the ringer volume.
• Speaker Volume—Sets the volume for the full-duplex speakerphone.
• Headset Volume—Sets the headset volume.
• Handset Volume—Sets the handset volume.
Only the Cisco IP Phone 6851 Multiplatform Phones support the Electronic Hookswitch feature.
Access the Phone Web Page, on page
Access the Phone Web Page, on page
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
Assign a Ringtone to an Extension
92.
92.
137