Configuring On-Demand Ring Tones (Spa525G); User-Created Mp3 Ring Tones (Spa525G); Creating And Uploading Ring Tones Using The Ring Tone Utility (Spa50Xg Only) - Cisco 501G Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Configuring Phone Features
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
To remove the User 1 ring tone from the phone, set the
http://phone_ip_addr/ringtone1?/delete
Click Submit All Changes.

Configuring On-Demand Ring Tones (SPA525G)

The SPA525G supports on-demand ring tones, which means that ring tones are
downloaded and played from a TFTP server when a call comes in. To configure:
Log in to the web administration interface.
Click Admin Login and advanced.
Click the Phone tab.
Under Ring Tone, in one or more of the ten ring tone fields, enter the following:
n=office;w=[tftp://]host[:port]/path;c=0
and specify the URL to download in the host/port/path field. If the connection
cannot be established, a default ring tone is played.
Click Submit All Changes.

User-Created MP3 Ring Tones (SPA525G)

SPA525G users can create up to two ring tones from an MP3 audio file stored on a
USB memory device. For instructions, see the
User Guide (SIP)
, located on Cisco.com. (See
Here," for the location of this document.)
Creating and Uploading Ring Tones Using the Ring Tone Utility
(SPA50XG only)
To convert a file for use as a ring tone, use the Ring Tone Utility, available at:
https://www.myciscocommunity.com/docs/DOC-6672
path
to delete, as follows:
Cisco Small Business Pro SPA525G
Appendix C, "Where to Go From
3
51