Configuring Back Light Settings (Cisco Spa525G Or Cisco Spa525G2); Configuring Linksys Key System Parameters - Cisco SPA301 Administration Manual

Customizing Standard Features

Configuring Linksys Key System Parameters

STEP 3
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
Configuring Linksys Key System Parameters
STEP 1
STEP 2
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Click Submit All Changes.
Cisco SPA525G or Cisco SPA525G2:
Click Admin Login > advanced > Voice > User.
Under Screen, in the LCD Contrast field, enter a number value from 1 to 30. The
higher the number, the greater the contrast on the IP phone screen.
Click Submit All Changes.
Configuring Back Light Settings (Cisco SPA525G or
Cisco SPA525G2)
To configure the back light settings for the IP phone screen on the phone:
Click Admin Login > advanced > Voice > User.
Under Screen in the Back Light Enable field, choose yes to enable the screen back
light.
In the Back Light Timer field, enter the number of seconds of idle time that can
elapse before the back light turns off.
Click Submit All Changes.
To configure the phone as part of a Linksys Key System (for use with the
Cisco SPA9000 or Cisco UC320):
Click Admin Login > advanced > Voice > SIP.
Under Linksys Key System Parameters, configure the following fields:
• Linksys Key System—Enables or disables the Linksys Key System for use
with the Cisco SPA9000. Defaults to yes. See the Cisco SPA9000
Administration Guide
for more details.
3
System
60