Configure The Sip Timer Values; Configure The Response Status Code Handling; Configure The Rtp Parameters - Cisco 6800 Series Administration Manual

Phone Installation

Configure the SIP Timer Values

Before you begin
Access the phone administration web page. See
Procedure
Step 1 Select Voice > SIP.
Step 2 In the SIP Timer Values section, set the SIP timer values in seconds as described in
on page
Step 3 Click Submit All Changes.

Configure the Response Status Code Handling

Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > SIP.
Step 2 In the Response Status Code Handling section, set the values as specified:
• Try Backup RSC—SIP response code that retries a backup server for the current request. Defaults to
• Retry Reg RSC—SIP response code that the phone retries registration after failing during the last
Step 3 Click Submit All Changes.

Configure the RTP Parameters

Before you begin
Access the phone administration web page. See
234.
blank. For example, you can enter numeric values 500 or a combination of numeric values plus wild
cards if multiple values are possible. For the latter, you can use 5?? to represent all SIP Response messages
within the 500 range. If you want to use multiple ranges, you can add a comma "," to delimit values of
5?? and 6??.
registration. Defaults to blank. For example, you can enter numeric values 500 or a combination of
numeric values plus wild cards if multiple values are possible. For the latter, you can use 5?? to represent
all SIP Response messages within the 500 range. If you want to use multiple ranges, you can add a comma
"," to delimit values of 5?? and 6??.
Access the Phone Web Page, on page
Access the Phone Web Page, on page
Access the Phone Web Page, on page
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
Configure the SIP Timer Values
92.
SIP Timer Values (sec),
92.
92.
69