Dns2Ip; Vlansetting; Default - Cisco ATA186-I1 Administrator's Manual

Chapter 5 Parameters and Defaults
Voice Configuration Menu Access Code
916
Related Parameter
DHCP, page 5-8

DNS2IP

Description
This parameter is for setting the secondary domain name server (DNS) IP address, if the DHCP server
does not provide one. If DHCP provides DNS2IP (if it is non-zero), this parameter overwrites the
DHCP-supplied value. You cannot specify a port parameter. The Cisco ATA uses the default DNS port
only.
Value Type
IP address

Default

0.0.0.0
Voice Configuration Menu Access Code
917
Related Parameter
DHCP, page 5-8

VLANSetting

Description
This parameter is used for specifying VLAN-related settings.
Bitmap definitions are as follows for the VLANSetting parameter:
•
•
•
•
•
Value Type
Bitmap
Default
0x0000002b
OL-4652-01
Bits 0-2—Specify VLAN Class of Service (CoS) bit value (802.1 P priority) for signaling IP packets.
Bits 3-5—Specify VLAN CoS bit value (802.1 P priority) for voice IP packets.
Bits 6-17—Reserved.
Bits 18-29—User-specified 802.1Q VLAN ID.
Bits 30-31—Reserved.
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)
Network Configuration Parameters
5-11