Dhcp Status Html Page; Real-Time Transport Protocol (Rtp) Statistics Reporting - Cisco ATA186-I1 Administrator's Manual

Chapter 8 Troubleshooting
Table 8-5
Bit Number
0
1
4
5
8
9
10
11
12

DHCP Status HTML Page

You can use the following command to check the status DHCP-related information:
http://ipaddress/stats/
where ipaddress is the IP address of the Cisco ATA.
The information you receive includes the following:
•
•
•

Real-Time Transport Protocol (RTP) Statistics Reporting

To monitor the quality of service for the media stream, you can access RTP packet statistics of the two
voice ports and their channels by opening the following page on the Cisco ATA Web server:
<Cisco ATA IP address>/rtps
The following RTP packet statistics are reported:
•
•
•
•
•
•
•
OL-4652-01
Web Configuration Menu Example Network Status
Description
Cisco ATA sent request for configuration file, ata<macaddress>, to
TFTP server
Cisco ATA sent request for configuration file, atadefault.cfg, to
TFTP server
Cisco ATA sent request for image file to TFTP server
Cisco ATA failed to upgrade to the downloaded image file
Configuration file is not found
Bad configuration file
Checksum error for configuration file
Decode error for configuration file (encryption related)
Configuration file is processed successfully
Elapsed time since most recent renewal of Cisco ATA IP address.
Elapsed time since most recent successful Cisco ATA registration.
IP address of the proxy to which the Cisco ATA is registered.
rxDuration—the number of seconds since the beginning of reception
rxPktCnt—the total number of RTP packets received
rxOctet—the total number of RTP payload octets received (not including RTP header)
latePktCnt—the total number of late RTP packets received
totalLostPktCnt—the total number of lost RTP packets received (not including late RTP packets)
avgJitter—an estimate of statistical variance of the RTP packet inter-arrival time, measured in
timestamp unit. (Calculation is based on the formula in RFC1889.)
txDuration—the number of seconds since the beginning of transmission
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)

DHCP Status HTML Page

Boolean Value
True
False
True
False
False
False
False
False
True
8-13