Chapter 7
Upgrading the Cisco ATA Signaling Image
Using a Web Browser
To use your web browser to verify a successful image upgrade, perform the following steps:
Procedure
Step 1
Open your web browser.
Step 2
Enter the IP address of your Cisco ATA Web configuration page:
http://<IP address>/dev
Refresh the page to clear the cache.
Step 3
The image version number and its build date should appear at the bottom-left corner of the Cisco ATA
Web configuration page.
Using the Voice Configuration Menu
To use the voice configuration menu to verify a successful image upgrade, perform the following steps:
Procedure
Pick up the telephone handset attached to the Phone1 port of the Cisco ATA.
Step 1
Press the function button on the Cisco ATA.
Step 2
Press 123# on the telephone keypad to play out the image version number.
Step 3
Press 123123# on the telephone keypad to play out the image build date.
OL-4652-01
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)
Confirming a Successful Signaling Image Upgrade
7-7