Mediaport - Cisco ATA186-I1 Administrator's Manual

Network Configuration Parameters
•
•
If LBRCodec=3, then the Phone 2 FXS port can operate with the following codecs:
•
•
•
•
Value Type
Integer
Range
0 or 3
Default
3
Voice Configuration Menu Access Code
300
Related Parameters
ConnectMode, page 5-21
AudioMode, page 5-16

MediaPort

Description
Use this parameter to specify the base port where the Cisco ATA transmits and receives RTP media. This
parameter must be an even number. Each connection uses the next available even-numbered port for
RTP.
Value Type
Integer
Range
1 to 65535
Default
16384
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)
5-14
Codec[2]=G.729 (only if Bit 21 of the ConnectMode parameter is set to 0)
Codec[3]=G.729A
Number of codecs=3
Codec[0]=G.711µ-law
Codec[1]=G.711A-law
Codec[2]=G.729 (only if Bit 21 of the ConnectMode parameter is set to 1)
(bit 21)
(bits 1 and 17)
Chapter 5 Parameters and Defaults
OL-4652-01