Cisco ATA186-I1 Administrator's Manual page 34

Installation Procedure
Figure 2-1
Analog telephones
Figure 2-2
Analog telephones
Procedure
Step 1 Place the Cisco ATA near an electrical power outlet.
Connect one end of a telephone line cord to the Phone 1 input on the rear panel of the Cisco ATA.
Step 2
Connect the other end to an analog telephone set.
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)
2-4
Cisco ATA 186 Rear Panel Connections
PHONE 1 PHONE 2 10BaseT
IP network
(or fax)
5V power
adaptor
Cisco ATA 188 Rear Panel Connections
PHONE 1 PHONE 2 LINK 10/100 PC
IP network
(or fax)
5V power
PC
adaptor
ACT 5V
Power outlet
Power cord
10/100 UPLINK LINK 5V
Power outlet
Power cord
Chapter 2 Installing the Cisco ATA
OL-4652-01