Table of Contents
Advertisement
Network Configuration Parameters
DNS2IP
Description
This parameter is for setting the secondary domain name server (DNS) IP address, if the DHCP server
does not provide one. If DHCP provides DNS2IP (if it is non-zero), this parameter overwrites the
DHCP-supplied value. You cannot specify a port parameter. The Cisco ATA uses the default DNS port
only.
Value Type
IP address
Default
0.0.0.0
Voice Configuration Menu Access Code
917
VLANSetting
Description
This parameter is for firmware version 2.15 and above.
Bitmap definitions are as follows for the VLANSetting parameter:
•
•
•
•
•
Value Type
Bitmap
Default
0x0000002b
Voice Configuration Menu Access Code
324
Related Parameter
OpFlags, page 5-34
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0)
5-12
Bits 0-2—Specify VLAN Class of Service (CoS) bit value (802.1P priority) for signaling IP packets.
Bits 3-5—Specify VLAN CoS bit value (802.1P priority) for voice IP packets.
Bits 6-17—Reserved.
Bits 18-29—User-specified 802.1Q VLAN ID.
Bits 30-31—Reserved.
Chapter 5
Parameters and Defaults
OL-4804-01
Advertisement
Table of Contents
