Procedure For Upgrading One Cisco Ata; Running The Executable - Cisco ATA186-I1 Administrator's Manual

Chapter 7 Upgrading the Cisco ATA Signaling Image

Procedure for Upgrading One Cisco ATA

Procedure for Upgrading One Cisco ATA
Download the latest Cisco ATA release software for SCCP from the Cisco web site, and store the files on Download the latest Cisco ATA release software for SCCP from the Cisco web site, and store the files
Step 1 Step 1
the Cisco CallManager TFTP server. For more information, see the on the Cisco CallManager TFTP server. For more information, see the
Cisco ATA Software" section on page Cisco ATA Software" section on page
Step 2 Step 2 Go to the main Cisco CallManager Administration screen. Go to the main Cisco CallManager Administration screen.
Note Note
Step 3 Step 3 From the Device pull-down menu, select Phone. The Find and List Phones screen appears. From the Device pull-down menu, select Phone. The Find and List Phones screen appears.
Step 4 Step 4 In the area next to the Find button, enter a portion or all of the Cisco ATA MAC address, then press Find. In the area next to the Find button, enter a portion or all of the Cisco ATA MAC address, then press Find.
The Find and List Phones screen reappears, and now contains the Cisco ATAs that match the find criteria The Find and List Phones screen reappears, and now contains the Cisco ATAs that match the find criteria
you entered in the previous screen. you entered in the previous screen.
Click the icon of the Cisco ATA whose signaling image you would like to upgrade. The Phone Click the icon of the Cisco ATA whose signaling image you would like to upgrade. The Phone
Step 5 Step 5
Configuration screen appears. Configuration screen appears.
In the Phone Load field, enter the name of the signaling image (the signaling image has an extension of .zup, In the Phone Load field, enter the name of the signaling image (the signaling image has an extension of
Step 6 Step 6
for example, ATA186-v2-15-ms-020812a.zup). .zup, for example, ATA186-v2-15-ms-020812a.zup).
Press Update. Press Update.
Step 7 Step 7
You will receive a message that you should reset the device. Click OK. You will receive a message that you should reset the device. Click OK.
Step 8 Step 8
Click the Reset Phone button on the Phone Configuration screen. Click the Reset Phone button on the Phone Configuration screen.
Step 9 Step 9
The Reset Device pop-up window appears. Click Reset. The Reset Device pop-up window appears. Click Reset.
Step 10 Step 10
A confirmation box appears. Click OK. A confirmation box appears. Click OK.
Step 11 Step 11
The function button on the Cisco ATA blinks during the upgrade. Once the button stops blinking, the The Function button on the Cisco ATA blinks during the upgrade. Once the button stops blinking, the
upgrade is complete and the device re-registers to the Cisco CallManager. upgrade is complete and the device re-registers to the Cisco CallManager.
If you use this method, you should be running Cisco CallManager versions 3.0 or 3.1 only.
If you are a registered CCO user. go to the following URL:
http://www.cisco.com/cgi-bin/tablebuild.pl/ata186
Download the zip file that contains the software for the applicable release and signaling image you are
using. The contents of each file are described next to the file name. Save the zip file onto a floppy disc.

Running the Executable

upgradecode Syntax
upgradecode:3,0x301,0x0400,0x0200,tftp_server_ip,69,image_id,image_file
upgradecode Definitions
The following values need to be modified:
•
OL-4652-01
Before continuing this procedure, make sure that the Load Information field for the Cisco ATA 186 Before continuing this procedure, make sure that the Load Information field for the Cisco ATA
Device Type is set to 0 on the Device Defaults screen (System > Device Defaults). 186 Device Type is set to 0 on the Device Defaults screen (System > Device Defaults).
tftp_server_ip is the TFTP server which contains the latest image (image_file).
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)
Upgrading the Signaling Image Via Cisco CallManager
3-7. 3-7.
"Setting Up the TFTP Server with "Setting Up the TFTP Server with
7-3