Network Configuration Parameters
Voice Configuration Menu Access Code
Not applicable for this parameter.
Related Parameters
•
•
•
Network Configuration Parameters
This section includes the parameters for enabling or disabling the use of a DHCP server to obtain IP
address information, and parameters that you need to statically configure if you disable DHCP:
•
•
•
•
•
•
•
•
•
•
•
•
DHCP
Description
A DHCP server can be used to automatically set the Cisco ATA IP address, the network route IP address,
the subnet mask, DNS, NTP, TFTP, and other parameters.
•
•
Value Type
Boolean
Range
0 or 1
Default
1
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)
5-8
UseTFTP, page 5-4
TftpURL, page 5-4
EncryptKey, page 5-6
DHCP, page 5-8
StaticIp, page 5-9
StaticRoute, page 5-9
StaticNetMask, page 5-10
DNS1IP, page 5-10
DNS2IP, page 5-11
VLANSetting, page 5-11
CA0orCM0 and CA1orCM1, page 5-12
EPID0orSID0 and EPID1orSID1, page 5-13
LBRCodec, page 5-13
MediaPort, page 5-14
Domain, page 5-15
1—Enable DHCP
0—Disable DHCP
Chapter 5
Parameters and Defaults
OL-4652-01