Cisco ATA186-I1 Administrator's Manual page 157

How to Use Pre-call and Mid-call Services
This section contains end-user procedures for pre-call services and mid-call services that the Cisco ATA
supports for the SCCP protocol.
The Cisco ATA administrator should provide these procedures to the end user.
Note
This section contains the following topics:
•
•
The services listed in this section are supported by Cisco CallManager. For Cisco IOS Telephony
Note
Service (ITS)-supported services, refer to ITS documentation.
Procedures for Using Pre-call Services
The following list contains the pre-call services that the Cisco ATA (SCCP protocol) supports:
•
•
•
•
•
•
•
•
•
OL-4652-01
Procedures for Using Pre-call Services, page A-1
Procedures for Using Mid-call Services, page A-4
Access Voicemail, page A-2
Change Your Pre-Call Service Access Code, page A-2
Activate Call-Forward-All, page A-2
Cancel Call-Forward-All, page A-2
Redial, page A-2
Speed Dial, page A-3
Call Pickup, page A-3
Group Call Pickup, page A-3
MeetMe Conference, page A-4
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)
A P P E N D I X
A
A-1