Table of Contents
Advertisement
Diagnostic Parameters
TraceFlags
Description
This parameter is for diagnostic use. Bit values are as follows:
•
•
•
Value Type
Bitmap
Default
0x00000000
Voice Configuration Menu Access Code
313
Related Parameters
NPrintf, page 5-37
SyslogIP
Description
Use this parameter for diagnostic purposes; specify the IP address and port number to which the
Cisco ATA should send its syslog output information.
The program prserv.exe, which is included in all Cisco ATA software upgrade packages, can be used to
capture syslog information if you do not have a syslog server.
Syntax
<HOST_IPaddress>.<HOST_PORT>
Example
If you want to send syslog information to the host at IP address 192.168.2.170 and port number 514, do
the following:
•
•
Value Type
Extended IP address
Default
0.0.0.0.514
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)
5-38
Bits 0 to 6—Reserved
Bit 7—SCCP message log (set to 0 for a simplified log; set to 1 for a detailed log).
Bits 8 to 31—Reserved
Configure the value of this parameter as 192.168.2.170.514
On your PC, run the command:
prserv 514
Chapter 5
Parameters and Defaults
OL-4652-01
Advertisement
Chapters
Table of Contents
