Domain - Cisco ATA186-I1 Administrator's Manual

Chapter 5 Parameters and Defaults
Voice Configuration Menu Access Code
202
Related Parameters
•
•

Domain

Description
The Cisco ATA uses the value of this parameter for a DNS search if either the TftpUrl or CM0orCA0
parameters do not contain a fully qualified domain name. For example, if cm1 is specified as the
Cisco CallManager URL, and cisco.com is the value of the Domain parameter, then the Cisco ATA uses
cm1@cisco.com for its DNS search.
The following values are valid:
•
•
•
•
Value Type
Alphanumeric string
Range
Maximum 31 characters
Default
.
Voice Configuration Menu Access Code
931
Related Parameters
•
•
OL-4652-01
TOS, page 5-25
VLANSetting, page 5-11
Dot (.) or blank—Uses DHCP-provided IP address if available; otherwise use static IP address.
0—Uses DHCP-provided domain name if available; otherwise use static IP address.
*—Uses Cisco ATA MAC address.
String—Uses specified string.
TftpURL, page 5-4
CA0orCM0 and CA1orCM1, page 5-12
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)
Network Configuration Parameters
5-15