User Interface (Ui) Security Parameter; Uipassword - Cisco ATA186-I1 Administrator's Manual

Chapter 5 Parameters and Defaults
FXSOutputLevel:-4
ConnectMode:0x90000400
SigTimer:0x00000064
OpFlags:0x2
TOS:0xA0
DialTone:2,31538,30831,1380,1740,1,0,0,1000
DialTone2:2,29780,30743,1252,1384,1,0,0,1000
BusyTone:2,30467,28959,1191,1513,0,4000,4000,0
ReorderTone:2,30467,28959,1191,1513,0,2000,2000,0
RingBackTone:2,30831,30467,1943,2111,0,16000,32000,0
CallWaitTone:1,30831,0,5493,0,0,2400,2400,4800
AlertTone:1,30467,0,5970,0,0,480,480,1920
NPrintf:0
TraceFlags:0x00000000
SyslogIP:0.0.0.0.514
SyslogCtrl:0x00000000

User Interface (UI) Security Parameter

This parameter type contains one parameter—UIPassword.

UIPassword

Description
This parameter controls access to web page or voice configuration menu interface. To set a password,
enter a value other than zero.
To clear a password, change the value to 0.
You cannot recover a forgotten password unless you reset the entire configuration of the Cisco ATA (see
the
When UIPassword contains letters, you cannot enter the password from the telephone keypad.
Note
Value Type
Alphanumeric string
Range
Maximum nine characters
Default
0
Voice Configuration Menu Access Code
7387277
Related Parameter
OpFlags, page 5-24
OL-4652-01
"Resetting the Cisco ATA to Factory Default Values" section on page
(bit 7)
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)
User Interface (UI) Security Parameter
3-24).
5-3