Configuration Text File Template - Cisco ATA186-I1 Administrator's Manual

Configuration Text File Template

The term Cisco ATA is used throughout this manual to refer to both the Cisco ATA 186 and the
Note
Cisco ATA 188, unless differences between the Cisco ATA 186 and Cisco ATA 188 are explicitly
stated.
This section contains recommended values for the United States and other countries as configuration
Note
examples for certain parameters. For detailed recommendations of tone-parameter values by country, see
Appendix E, "Recommended Cisco ATA Tone Parameter Values by Country."
Configuration Text File Template
This is a listing of the sk_example.txt text file, without its annotations, that comes bundled with the
Cisco ATA software.
You can make a copy of this file and use it as a template for creating your own default configuration file
or Cisco ATA-specific configuration file. For instructions on how to create these configuration files, see
the
Configuration File for a Specific Cisco ATA" section on page
The sk_example.txt file contains all the Cisco ATA default values. The sections that follow this listing
describe all the parameters in this file.
#txt
UIPassword:0
UseTftp:1
TftpURL:0
EncryptKey:0
upgradecode:0,0x301,0x0400,0x0200,0.0.0.0,69,0,none
upgradelang:0,0x301,0x0400,0x0200,0.0.0.0,69,0,none
Dhcp:1
StaticIp:0
StaticRoute:0
StaticNetMask:0
DNS1IP:0.0.0.0
DNS2IP:0.0.0.0
VLANSetting:0x0000002b
CA0orCM0:0
CA1orCM1:0
CA0UID:0
CA1UID:0
EPID0orSID0:.
EPID1orSID1:.
PrfCodec:1
LBRCodec:3
MediaPort:16384
Domain:0
AudioMode:0x00350035
NumTxFrames:2
CallerIdMethod:0x00019e60
Polarity:0
FXSInputLevel:-1
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)
5-2
IP address (e.g. 192.168.2.170)
–
Integer (32-bit integer)
–
Numeric digit string
–
"Creating a Cisco ATA Default Configuration File" section on page 3-9
Chapter 5 Parameters and Defaults
and the "Creating a
3-11.
OL-4652-01