U.s. Call Command - Cisco ATA186-I1 Installation And Configuration Manual

Appendix G Call Commands

U.S. Call Command

OL-1267-01
The default U.S. Call command is:
Af;AH;BS;NA;CS;NA;Df;EB;Ff;EP;Kf;EFh;HQ;Jf;AFh;HQ;I*67;gA*82;fA#90
v#;OI;H#72v#;bA#74v#;cA#75v#;dA#73;eA*67;gA*82;fA*70;iA*69;DA*99;x
A;Uh;GQ;
Af;AH;
Conference
hook-flash; NONE Disconnect-the-call;
BS;NA;
Predial
#|*; Go-to-configuration-mode NONE;
CS;NA;
Predial_Holding
#|*; Go-to-configuration-mode NONE;
Df;EB;
Connected
hook-flash; Hold-the-active-call Seizure;
Ff;EP;
Connected_Alerting
hook-flash; Hold-the-active-call Answer-the-incoming-call;
Kf;EFh;HQ;
CallWaiting
hook-flash; Hold-the-active-call Retrieve-the-waiting-call
on-hook; Disconnect-the-call Transfer-with-consultation;
Jf;AFh;HQ;
3WayCalling
hook-flash; NONE Retrieve-the-waiting-call
on-hook; Disconnect-the-call Transfer-with-consultation;
Cisco ATA 186 Installation and Configuration Guide
Syntax
G-13