Table of Contents
Advertisement
Firmware Upgrade Parameters
•
•
Example:
1,0x031,0x0400,0x0200,192.168.2.170,69,0x1,ef2_200h.kxz
1= upgrade policy
0x031=hardware version
0x0400=software type
0x0200=software version
192.168.2.170=tftp_ip_address
69=TFTP port
0x1=image id
ef2_200h.kxz=firmware image file name
Cisco ATA 186 Installation and Configuration Guide
B-6
image_id—used for force upgrade to determine if an upgrade had taken place
previously.
firmware_image_file_name—firmware image file name.
For example,
–
upgradecode:1,0x301,0x0400,0x0200,192.168.2.170,69,0x1,
ef2_200h.kxz
–
upgradelang:1,0x301,0x0400,0x0200,192.168.2.170,69,0x1,ef2e200h.kbx
–
The default values listed below will not trigger any upgrade.
upgradecode:0,0x301,0x0400,0x0200,0.0.0.0,69,0,none
upgradelang:0,0x301,0x0400,0x0200,0.0.0.0,69,0,none
Appendix B
Parameters and Defaults
OL-1267-01
Advertisement
Table of Contents
Troubleshooting
