Cisco ATA186-I1 Installation And Configuration Manual page 112

Operating Parameters
Table B-3 Common Operating Parameters and Defaults (continued)
Parameter
LBRCodec
NTPIP
NumTxFrames
Op Flag
Cisco ATA 186 Installation and Configuration Guide
B-12
Value
Type Description
Integer Low-bit-rate codec. Possible values
are:
• 0—select G.723 as low-bit-rate
codec.
• 3—select G.729A as low-bit-rate
codec.
IP NTP IP address (needed if DHCP
server does not provide one).
Integer Transmit frames per packet. Use only
the recommended default.
Bitmap Enables/disables various operational
features.
If Bit 0 (mask 0x1) is set to 1, always
use the internally generated TFTP file
name.
If Bit 1 (mask 0x2) is set to 1, do not
perform static network router probing
at cold start.
Appendix B Parameters and Defaults
IVR Access
Code Default
300 0
141 0.0.0.0
35 2
323 0x2
OL-1267-01